|
Mint condition PRO-2051
Bought this scanner in 2006, used it less than 4 hours....anyone wNt to buy ......mint condition, has been in a storage unit for last 9 years. Contact me at bobstell@...
Bought this scanner in 2006, used it less than 4 hours....anyone wNt to buy ......mint condition, has been in a storage unit for last 9 years. Contact me at bobstell@...
|
By
Bob Stell
·
|
|
Uniden BCT8 firmware EPROM in Radio Shack PRO-2051
Does anyone know if a Uniden BCT8 Eprom would work in a Radio Shack PRO-2051 so it could be reflashed?
Does anyone know if a Uniden BCT8 Eprom would work in a Radio Shack PRO-2051 so it could be reflashed?
|
By Greg
·
|
|
Help 10 messages
Can anyone help to understand to program this scanner? Or where I can take it to or send to have it done.i live in Spring, Tx 77388. Any help is better then what I have right now.. David Briner Sent f
Can anyone help to understand to program this scanner? Or where I can take it to or send to have it done.i live in Spring, Tx 77388. Any help is better then what I have right now.. David Briner Sent f
|
By David Briner
·
|
|
Program my pro 2051 5 messages
I have just gotten my scanner and would like to talk to someone on programming. I got the unit from some and they said it was program but not with the county that I need. I just have a lot of question
I have just gotten my scanner and would like to talk to someone on programming. I got the unit from some and they said it was program but not with the county that I need. I just have a lot of question
|
By David Briner
·
|
|
wyolink 2 messages
any body have trunk chanels for wyolink and how to program them on scanner is it moto 1 or 2
any body have trunk chanels for wyolink and how to program them on scanner is it moto 1 or 2
|
By
anthonyfaustinaprice@...
·
|
|
Hi there group
Hi I looked at some files but most were as "Document Not FoundThe document you requested could not be found." Being new to the group I thought it might be hidden. Now onward to the PRO-2051. Software:
Hi I looked at some files but most were as "Document Not FoundThe document you requested could not be found." Being new to the group I thought it might be hidden. Now onward to the PRO-2051. Software:
|
By kbhz5746
·
|
|
Help with lockout 12 messages
Ok I dug out my scanner and started him up and 3-10 are locked out I downloaded the original manual i even reset the whole scanner and those banks continue to be locked ou? I have not tried to program
Ok I dug out my scanner and started him up and 3-10 are locked out I downloaded the original manual i even reset the whole scanner and those banks continue to be locked ou? I have not tried to program
|
By prettyone1432
·
|
|
Starcom21 Programming 14 messages
New to the game and have been trying to get starcom21 setup with Dupage County IL. I am using the ARC443 program. I am having a hard time doing imports from the internet, seems to only paste two or th
New to the game and have been trying to get starcom21 setup with Dupage County IL. I am using the ARC443 program. I am having a hard time doing imports from the internet, seems to only paste two or th
|
By Wolfgang Smith
·
|
|
Pro-2051 program? 6 messages
anyone know how to manually program this scanner in terms i can understand? i bought w/out a manual and the online one doesn't help me much.... I do have the computer cable, but can't justify another
anyone know how to manually program this scanner in terms i can understand? i bought w/out a manual and the online one doesn't help me much.... I do have the computer cable, but can't justify another
|
By RayBob
·
|
|
Eureka! I found it! 2 messages
Some years ago, I bought several scanners from a ham fest. I got a R$ PR0-94, PRO-95, and a PRO-251. The gentlemen did not have the programming cable for the 2051 so I waited and bought the 20-047 off
Some years ago, I bought several scanners from a ham fest. I got a R$ PR0-94, PRO-95, and a PRO-251. The gentlemen did not have the programming cable for the 2051 so I waited and bought the 20-047 off
|
By ka5lqj
·
|
|
Pro-2051 software....
The software for the Radio Shack Pro 2051 is made by Butel. I think it's $30.00. It works better than ScatCat. (No offense, Jim, LOL!) GOD BLESS, 73, Area-5-Wx-Group(at) gmail(dot)com -- This electron
The software for the Radio Shack Pro 2051 is made by Butel. I think it's $30.00. It works better than ScatCat. (No offense, Jim, LOL!) GOD BLESS, 73, Area-5-Wx-Group(at) gmail(dot)com -- This electron
|
By Don Saunders
·
|
|
New owner 4 messages
Just got one of these radio's are they ez to program? Where can I get the software?
Just got one of these radio's are they ez to program? Where can I get the software?
|
By K9DXR
·
|
|
WOW! What a scanner! 2 messages
Hi All, I'm "new" to the Group. My name is Don - Double Or Nothing and my Amateur radio callsign in KA5LQJ - King Ace 5 Lucky Queens & Jacks, LOL! I've been a "ham" all my LIFE, but only a licensed Am
Hi All, I'm "new" to the Group. My name is Don - Double Or Nothing and my Amateur radio callsign in KA5LQJ - King Ace 5 Lucky Queens & Jacks, LOL! I've been a "ham" all my LIFE, but only a licensed Am
|
By ka5lqj
·
|
|
Dim display... 7 messages
I got my unit from out of the closet, as it's been a few months I've stored it and Fall is almost here, I'd thought I'd set it up. When I turn the unit on, everything seems to work, the display lights
I got my unit from out of the closet, as it's been a few months I've stored it and Fall is almost here, I'd thought I'd set it up. When I turn the unit on, everything seems to work, the display lights
|
By
rivernet1
·
|
|
2051 FS
2051 fs, don't need 2! $125 shipped conus. Contact off list please. Rich
2051 fs, don't need 2! $125 shipped conus. Contact off list please. Rich
|
By
Rich
·
|
|
software cable installation 2 messages
I just got the radio shack software cable and cd #20-047. It is kind of confusing for the driver install for me. It says to attach the cable via the usb port, which I did. Next it says that the instal
I just got the radio shack software cable and cd #20-047. It is kind of confusing for the driver install for me. It says to attach the cable via the usb port, which I did. Next it says that the instal
|
By marty
·
|
|
Yahoo! Groups is doing some house cleaning ! !
This is a notice I received from Yahoo just giving a heads up to insure that this group is not effected post something ham related to the group or just let us know your still around and not a SK. Hell
This is a notice I received from Yahoo just giving a heads up to insure that this group is not effected post something ham related to the group or just let us know your still around and not a SK. Hell
|
By Allan C
·
|
|
Looking for Scanner Softrware 4 messages
Hello Group Just wondering what the best software out there is for this scanner?? I own a BC796D and a BC996T also and use BCtools with is awesome because I can set it up and every time a transmission
Hello Group Just wondering what the best software out there is for this scanner?? I own a BC796D and a BC996T also and use BCtools with is awesome because I can set it up and every time a transmission
|
By
Jeffrey
·
|
|
Butel software
Hey anybody program an EDACS systems on this scanner with Butel software? Larry VE7CFF
Hey anybody program an EDACS systems on this scanner with Butel software? Larry VE7CFF
|
By Larry
·
|
|
Cable
I have one of the cables that you are looking for. It is new in the box. $15.00 inclueding shipping in the US Thanks Jerry C.
I have one of the cables that you are looking for. It is new in the box. $15.00 inclueding shipping in the US Thanks Jerry C.
|
By whiskeyrunner62
·
|