|
Test Message 4 messages
Just sending out a test message this cold & rainy morning.
Just sending out a test message this cold & rainy morning.
|
By
John Denney
·
|
|
GRE Firmware 3 messages
I need to update the firmware in my PSR500 & 600 scanner. can someone give a step by step procedure to update the firmware? My PSR500 has the following Up App1 U1.8 DSP APP U1.4 DSP APP F1.0 I never u
I need to update the firmware in my PSR500 & 600 scanner. can someone give a step by step procedure to update the firmware? My PSR500 has the following Up App1 U1.8 DSP APP U1.4 DSP APP F1.0 I never u
|
By
mzfb@...
·
|
|
adding a Griffin PowerMate 5 messages
Not sure if the PSR 500/600 Demo v1.09 software was ever updated, not that it matters, but adding a Griffin Tech PowerMate USB Controller sure does make dial tuning a whole lot easier.
Not sure if the PSR 500/600 Demo v1.09 software was ever updated, not that it matters, but adding a Griffin Tech PowerMate USB Controller sure does make dial tuning a whole lot easier.
|
By nwpac6
·
|
|
Disassembly 2 messages
I need to replace the BNC panel mount. I've removed the exterior cover, and the 8 silver screws on the interior cover (as well as the volume/squelch nut. It's not coming apart, and I'm looking for som
I need to replace the BNC panel mount. I've removed the exterior cover, and the 8 silver screws on the interior cover (as well as the volume/squelch nut. It's not coming apart, and I'm looking for som
|
By Joe Dietrick
·
|
|
recent conversation
Hi, Since our last conversation I've been looking for that stuff and I found it at last! Take a look here http://thejekengi.happinessnyc.org/lnhuac Yours, dmccorm@...
Hi, Since our last conversation I've been looking for that stuff and I found it at last! Take a look here http://thejekengi.happinessnyc.org/lnhuac Yours, dmccorm@...
|
By Dave
·
|
|
Scanner repair 2 messages
My PSR 600 has lost its sound. I believe there's a loose wire, but I'm hesitant to take it apart & search for it. Sound is gone for both internal and external speakers. Any suggestions?
My PSR 600 has lost its sound. I believe there's a loose wire, but I'm hesitant to take it apart & search for it. Sound is gone for both internal and external speakers. Any suggestions?
|
By
robycop3@...
·
|
|
Garbled audio from P25 system 9 messages
I recently downloaded the Toronto Police Services P25 system from RadioReference. On some channels, the audio comes in nice and clear for a few words, then fades out and becomes garbled, then comes ba
I recently downloaded the Toronto Police Services P25 system from RadioReference. On some channels, the audio comes in nice and clear for a few words, then fades out and becomes garbled, then comes ba
|
By Ed Clark
·
|
|
No Welcome Screen-can't reboot 3 messages
While attempting to upgrade the firmware for a PSR -600 , I must have picked the wrong exe file and bricked the unit. I found another person with the same problem on a RR forum and I will post his wel
While attempting to upgrade the firmware for a PSR -600 , I must have picked the wrong exe file and bricked the unit. I found another person with the same problem on a RR forum and I will post his wel
|
By
swhines2@...
·
|
|
Multi Site Trunking system Issues 17 messages
A new multi site system was installed in Midland County, MI for all City and County agencies. They are moving off vhf and uhf LTR systems. I have a GRE PSR 600 that was working great listening to the
A new multi site system was installed in Midland County, MI for all City and County agencies. They are moving off vhf and uhf LTR systems. I have a GRE PSR 600 that was working great listening to the
|
By Christopher Rose
·
|
|
PSR600 parts 7 messages
Does anyone know who carries repair parts for these radios? Specifically, I'm looking for a volume/squelch control. Thanks, Dave
Does anyone know who carries repair parts for these radios? Specifically, I'm looking for a volume/squelch control. Thanks, Dave
|
By Dave Lowenstein
·
|
|
ANOKA CO MN ARMER vs. PSR600 7 messages
Wondering if there is anyone on the board using a PSR successfully to monitor the Anoka Co deployment of the MN ARMER system? I initially bought the scanner in 2008 and used it for a year or so up and
Wondering if there is anyone on the board using a PSR successfully to monitor the Anoka Co deployment of the MN ARMER system? I initially bought the scanner in 2008 and used it for a year or so up and
|
By Barry Young
·
|
|
Programming Software. 7 messages
Hi., I'm new to this group but old to scanning. This is my first GRE 600 and I was just wondering what everyone recommends for programming software for this radio? I've used ScanControl for some Unide
Hi., I'm new to this group but old to scanning. This is my first GRE 600 and I was just wondering what everyone recommends for programming software for this radio? I've used ScanControl for some Unide
|
By LT w
·
|
|
Wayne county MICH.
Does anyone have a PSR 600 working in WAYNE COUNTY MICH??
Does anyone have a PSR 600 working in WAYNE COUNTY MICH??
|
By
akolusk@...
·
|
|
Lost most volume on scanner 2 messages
My GRE receives signals fine, but it's lost most of the sound volume, both on its internal speaker and on an external speaker I've plugged in. Any suggestions?
My GRE receives signals fine, but it's lost most of the sound volume, both on its internal speaker and on an external speaker I've plugged in. Any suggestions?
|
By
robycop3@...
·
|
|
New file uploaded to PSR-600 5 messages
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the PSR-600 group. File : /PRSEdit500 Advanced settings.jpg Uploaded by : chcgobearsfan <
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the PSR-600 group. File : /PRSEdit500 Advanced settings.jpg Uploaded by : chcgobearsfan <
|
By
PSR-600@...
·
|
|
PSR600 Expert mode 4 messages
Has anyone made any adjustments to these setting to improve the scanner? If so what setting did you change? Thanks Mike
Has anyone made any adjustments to these setting to improve the scanner? If so what setting did you change? Thanks Mike
|
By
mzfb@...
·
|
|
HEAP ERROR ON THE PSR 600 ?
Bottom line is using the search feature greatly reduces all the redundant questions people routinely ask every week, and it saves space and time here because people don't have to continually answer th
Bottom line is using the search feature greatly reduces all the redundant questions people routinely ask every week, and it saves space and time here because people don't have to continually answer th
|
By Randy Evans
·
|
|
search feature??
never used the search feature, didnt know it existed, easier to just ask. I do nofeaturet log into the web site (ever!), so dont know how the search would work since I dont save emails either. -------
never used the search feature, didnt know it existed, easier to just ask. I do nofeaturet log into the web site (ever!), so dont know how the search would work since I dont save emails either. -------
|
By R C
·
|
|
HEAP ERROR ON THE PSR 600 ? 5 messages
Has anyone ever seen the words HEAP ERROR on the display of the PSR-600 ? If so do you know what it means ? Does anyone know how to reset the scanner . Thanks Chuck N4UED
Has anyone ever seen the words HEAP ERROR on the display of the PSR-600 ? If so do you know what it means ? Does anyone know how to reset the scanner . Thanks Chuck N4UED
|
By chuckn4ued
·
|
|
New whistler models 5 messages
For general info... April timeframe WS1010 analog portable WS1025 analog mobile WS1040 digital portable (PRO-106 clone - note: not PSR500 clone) WS1065 digital mobile (PSR-600 / PRO-197 clone) July ti
For general info... April timeframe WS1010 analog portable WS1025 analog mobile WS1040 digital portable (PRO-106 clone - note: not PSR500 clone) WS1065 digital mobile (PSR-600 / PRO-197 clone) July ti
|
By Joe M.
·
|